Sewer Inspection Camera Maintenance and Using Tips

Sewer inspection cameras are tiny and flexible to slide across narrow, inaccessible spaces. Its sole purpose is to cater as a probing camera and provide live video detailed feed, close-up images transmitted from otherwise concealed locations. They include a flexible, long arm or probe attached to a unit. The tiny camera is mounted on the probe-end. There is a small screen that displays live view as the camera investigates its surrounding.

A sewer camera is a valuable tool, which needs to be used and cared for better performance and durability. If you just bought one from usaborescopes.com, then obviously you got a robust product. However, to improve its performance and combat plumbing system issues you need to get familiar with some tips and tricks to use and care for your drainage pipe inspection camera.

General maintenance tips

Check the equipment daily for –

  • Damaged cords, damaged switches
  • Strain reliefs pulled out
  • Missing ground prongs
  • Check the cable for damages
  • If necessary, replace or repair

Expose, clean, and oil all the moving parts, bushings, and bearings minimum two times in a year. Well-lubricated equipment lasts longer and the possibility of failure in the middle of your job reduces.

Proper using tips 

  • The camera head has to be kept attached to pushrod, all the time. It avoids accidental damage to connection parts.
  • Before starting a task, check whether the connection is snug or not. If necessary, hand-tighten it, but don’t over-tighten. Never use tools on the connections.
  • When you start to move slowly and cautiously because a little force to the pushrod can make it kink up. After you enter in apply short and fast motions to get around the bends but watch your route. Kink damage is also an expensive one.
  • If it is fine consider running water as you push the camera to lessen pushrod friction.
  • The reel can move quickly or kink up, which can harm the camera. So, keep hands near drain opening for better control on the reeling.
  • Use poly cover always to protect camera heads. The covers in rounded styles help to offset encounters experienced in larger lines.
  • A camera is a diagnostic tool, so never use it to clear the blockage. It can buckle, break pushrod, or damage the camera head.
  • Never use dirty or wet hands to operate the control because grit or dirt can get in the buttons causing them to not function properly.
  • When your inspection camera is not in work, then keep it away from jetters and cable machines. The control panels are water-resistant and not waterproof.
  • While pulling out the camera from the line, use a rag wetted in a cleaning solution to wipe the pushrod.
  • Clean the camera lens to avoid grit, oil, or grease from accumulating. Never use oil cleanser but a dry cloth. Gently wipe the lens surface to avoid scratch but successfully eliminate the dirt.
  • For best reel rotation adjust tension knob. It allows proper and easy stacking of the pushrod and avoids kink up.
  • In the end, check the camera head for signs of water access and damage.

With this maintenance and using tips your sewer inspection camera will need fewer repairs, but you can enjoy the great performance for a long time.

Author: admin

Leave a Reply

Your email address will not be published. Required fields are marked *